AI POWERED MANUFACTURING 3GW PRODUCTION CAPACITY TOPCon TECHNOLOGY RENEWABLE ENERGY HIGH EFFICIENCY MODULES SUSTAINABLE FUTURE SMART SOLAR SOLUTIONS
Pahal Solar

FREE ESTIMATE

Solar Savings Calculator

Find your ideal system size, cost, and savings in seconds

-- kW
System Size
₹-- / yr
Annual Savings
-- yrs
Payback Period
--
Panels Needed
-- sq.ft
Area Required
₹--
Approx. Cost
-- t
CO₂ Offset/Yr

Estimates based on average Indian sun-hours and typical rooftop pricing. Submit your details below for an exact site-survey quote.

Get Your Exact Quote

Our team will contact you with a precise proposal

MODULE COMPARISON

Why Pahal Solar?

Clarity in Comparison, Confidence in Performance — click any row to see full details

25.4%+
Cell Efficiency
40mm
Frame Height
HTAR
Anti-Reflective Glass
AI
100%
AI-Based Production
1
Cell
Efficiency comparison
Pahal Solar
M10R ≥ 25.4%, G12R ≥ 25.6%
Other Manufacturer
24.9% to 25.2%
Impact
High-quality A-grade cells improve generation, and offer longer lifespan against UV, heat and weathering.
2
Aluminium Frame
4 specifications compared
Pahal Solar
40mm frame height
Other Manufacturer
28–35mm frame height
Impact
Lower height reduces mechanical strength.
Pahal Solar
Anodizing ≥ 15µm
Other Manufacturer
Anodizing ≤ 8–12µm
Impact
Less anodizing increases rust risk over time.
Pahal Solar
Frame set weight ≥ 3kg*
Other Manufacturer
2.0–2.7kg
Impact
Lower weight reduces strength — micro-cracks from bending reduce generation.
Pahal Solar
Frame thickness 1.5mm (±0.2mm)
Other Manufacturer
1.0–1.2mm (±0.2mm)
Impact
Thinner frame reduces structural strength against wind load.
3
Encapsulant (EPE)
3 specifications compared
Pahal Solar
Higher GSM EPE used
Other Manufacturer
Lower GSM used
Impact
Lower GSM increases hotspot risk over time.
Pahal Solar
Front: 520 GSM
Other Manufacturer
420 GSM front, 390 GSM back
Impact
Moisture penetration causes delamination.
Pahal Solar
Back: 480 GSM
Other Manufacturer
390 GSM front, 390 GSM back (EVA)
Impact
Lower GSM leads to faster degradation.
4
Solar Glass
4 specifications compared
Pahal Solar
HTAR anti-reflective coated glass
Other Manufacturer
ARC coated glass
Impact
HTAR glass lets 0.4–0.5% more photons through, improving generation.
Pahal Solar
Front: 2.0mm thick
Other Manufacturer
Front: 2.0mm thick
Impact
HTAR coating is stronger and more UV resistant.
Pahal Solar
Back: 2.0mm thick
Other Manufacturer
Back: 1.8mm thick
Impact
Thicker back glass adds durability and long-term protection.
Pahal Solar
White grid printed back glass
Other Manufacturer
No grid printing
Impact
White grid returns photons to the cell, boosting generation.
5
Ribbon
Wire specification
Pahal Solar
PV Ribbon Ø0.26mm, virgin copper
Other Manufacturer
Ribbon Ø0.24mm
Impact
Thinner ribbon increases resistance and voltage drop, reducing power output.
6
Production Line
Manufacturing technology
Pahal Solar
100% AI-based advanced technology
Other Manufacturer
AI generally not used
Impact
AI-based manufacturing improves solar panel quality.
7
Research & Development (R&D)
Infrastructure comparison
Pahal Solar
State-of-the-art in-house R&D lab
Other Manufacturer
Limited R&D infrastructure
Impact
Ongoing research enables top-quality supply; strict testing ensures long-term module quality.

The materials may change due to technology and other reasons as required.  |  *Depends on frame thickness 1.5mm (±0.2mm)

Inside a Pahal Solar G12R Module

Click each layer to see the material and its role — front glass to back glass

1
Front Solar Glass
HTAR anti-reflective • 2.0mm thick
The topmost layer. HTAR (High Transmission Anti-Reflective) coated glass lets 0.4–0.5% more photons through than standard ARC glass, while shielding the cell from weather and impact.
2
Front EPE Sheet
520 GSM encapsulant
Bonds the front glass to the cell. A higher GSM here creates a stronger seal, protecting against moisture penetration and delamination.
3
Half-Cut Solar Cell
G12R ≥ 25.6% • M10R ≥ 25.4% efficiency
The core power-generating layer. Half-cut cells reduce internal resistance and hotspot risk, while high A-grade efficiency delivers more power and holds up better against UV, heat, and weathering.
4
Back EPE Sheet
480 GSM encapsulant
Bonds the cell to the back glass, sealing the bifacial structure. Higher GSM here means slower degradation and longer module life.
5
Back Solar Glass
White grid printed • 2.0mm thick
Completes the glass-glass bifacial structure, letting the panel capture reflected light from behind. The white grid printing returns stray photons to the cell, boosting generation.
JB
Junction Box + Cable
Power output & connection point
The junction box houses the bypass diodes and connects the module's output cables, carrying the generated power safely out to the rest of the system.

AI POWERED MANUFACTURING 3GW PRODUCTION CAPACITY TOPCon SOLAR TECHNOLOGY SOLAR PANEL MANUFACTURER INDIA MAKE IN INDIA SOLAR BIS APPROVED MODULES HIGH EFFICIENCY SOLAR PANELS PM SURYA GHAR YOJANA PARTNER RENEWABLE ENERGY SOLUTIONS 25 YEAR PERFORMANCE WARRANTY

Testimonials

Trusted From Over 100+ Clients and projects

Email
Phone
Messenger
WhatsApp
Messenger
WhatsApp
Phone
Email